Products

Industrial Centrifugal Fan
Tunnel Fan & Metro Fan
(Gas Heating) Make-up Air Unit
Infrared Radiant Heaters
Mixed Flow Fan
Axial Flow Fan
Inducing Fan
Kitchen Fume Extractor Fan
Cabinet Fans
Inline Centrifugal Fan
Roof Fan
Wall Mounted Fan
AHU FAN
INFINAIR motors
OEM Customization
Intelligent Control

Products

Sidewall Axial Exhaust Fan-WEX

● Wheel Specification: 250~900
● Installation: wall mounted
● Volume range: 400~290,00 m³/h
● Static pressure range: 40~300 Pa
 
● Forward sweeping blades to cut into air progressively,lager volume and low noise.
● Square housing and easier to install in the wall.
● Balance quality grade up to G2.5 (AMCA 204).
● Direct drive, high efficient and maintenance-free.
● Complete accessories available, more thoughtful.
● Elegant appearance matched with the modern architectural design.

Inquiry Online Job Ref

 
 
250-600mm
-- General type wheel with external rotor motor.

250-550mm
-- Explosion resistant aluminum wheel (aluminum belongs to non-ferrous metal and the explosion resistant class of fan is Spark C as AMCA-99 standard with the use of explosion resistant motor).

600-900mm
-- Steel wheel for both general and explosion resistant application (As explosion resistant, the matching inlet venturi is aluminum which belongs to nonferrous metal and the explosion resistant class of fan is Spark C as AMCA-99 standard with the use of explosion resistant motor).

Stress analyze tested: reliable strength for long time running
-- Computer aided stress analyze.
-- Strengthen slots properly located: according to repeating test.
-- Blade end vibration effectively reduced.
-- Prevent blade distortion or breaking after long time running.

Forward sweeping blades: advanced design
-- Optimized according to aero-dynamic simulation.
-- Wheel balancing level G2.5 (AMCA).
-- The blade surface is fluent and streamline, cut into air progressively.
-- The blade edge angle is properly designed, help reducing turbulence when air break away.
-- Low noise is kept under large volume.

Feature

Motor is inside of air stream and lubrication free: suitable for installing on high wall
-- Small size, simple structure, light and stable running.
-- Motor is inside of air stream: effective cooling extended motor life.
-- Lubricating free motor: maintenance free unit suitable for installing on high wall.
-- No belt: no need to climb high to replace belt from time to time.

Square housing: reasonable profile
-- Square opening in concrete, brick or steel wall: easier.
-- Single layer steel wall with horizontal support beam: simple and reliable.

Complete accessories available: thoughtful
-- Standard accessories: 45°weatherhood and stainless steel bird screen (for WEX air exhaust), 90°weatherhood and stainless steel insect screen (for WSP air supply), safety protective screening and stainless steel fastener.
-- Optional accessories: gravity back-draft damper, casing with epoxy spray coating and explosion resistant structure.
 

Naming

Naming Convention:

Stucture

Sidewall Axial Exhaust Fan-WEX 

Tech Spec

WEX Technical Specification

Fan Type

Sidewall axial flow exhaust fan shall be forward sweeping blades, constructed of steel or aluminum. The blades shall be strengthened by ribs to reduce partial stress to assure vibration peak value less than 4.5 mm/s. The wheel shall be balancing tested statically and dynamically to level G2.5 as AMCA 204 standard.

Quality Standards
The fan shall be tested in accordance with AMCA Standard 210 and 300. The manufacturer must own the production license for industrial products and ISO9001 quality system authentication.

Fan Housing
Fan housing shall be square, constructed of galvanized steel panel (option: epoxy powder coated). Motor supporting structure shall be strong enough to avoid resonance during operation. A safety mesh shall be installed in the indoor side to prevent debris into the fan. Outside is with 45 degree weatherhood and stainless steel birdscreen to prevent rainwater and birds into workshop.

Explosion-proof Structure (Only for explosion-proof type)
Fan shall conform to Spark C explosion-proof structure according to AMCA99 Standard. Explosion resistant sidewall fan: Type (size: 250~550) is aluminum wheel, inlet venturi is per aluminum. Type (size: 600~900) is steel wheel, inlet venturi is aluminum, The motor shall adopt explosion-proof type. The whole fan should own CNEX certification and the manufacturer must own the production license for anti-explosion electric products.

Motor
External rotor motor shall be IP44, internal rotor motor shall be IP54, insulation class F, Motor shall be inside the airstream for cooling. The wiring location of motor depends on customer and the length of outer wiring will be at least half a meter.

Nameplate
Permanently fixed aluminum nameplate shall be fixed on fan body clearly display fan mark, product model and serial number (i.e.: unique ID for each fan), so that the customer can use this number to find out the parts used.

Acceptable Manufacturers
Qualified suppliers shall have an AAA credit rating. Providing INFINAIR or similar products, with their design based on WEX models of INFINAIR.

Online Message

[!--temp.remarketingsetup--]