Industrial Centrifugal Fan
Tunnel Fan & Metro Fan
(Gas Heating) Make-up Air Unit
Infrared Radiant Heaters
Mixed Flow Fan
Axial Flow Fan
Inducing Fan
Kitchen Fume Extractor Fan
Cabinet Fans
Inline Centrifugal Fan
Roof Fan
Wall Mounted Fan
OEM Customization
Intelligent Control

Contact Us

Tel:+86 21-3918 5688 EXT-6896
E-mail:[email protected]


Axial Man Cooler Fan-YFMPX

● Wheel Specification: 450~710
● Installation: Can be mobile without installation
● Volume range: 700~210,00 m³/h
● Static pressure range: 0~200 Pa
● FLY-YOUNG series patented propeller-type axial wheel,large volume and low noise.
● Movable to make field use more convenient.
● Balance quality grade up to G2.5 (AMCA 204).
● Direct drive, high efficient and maintenance-free.
● Epoxy powder coating, corrosion and rust-proof.

Inquiry Online

Air performance design
Optimized design of CFD flow field simulation, repeatedly validated
Wheel cutting the air flow asymptotically, air flow direction is stable and high in consistence
3D curved blade design: Guide air to flow smoothly and reduce turbulent current
National patented technology recognition

High reliable design: safe, stable and long life
FEA aided design, distributed evenly of stress for making operation reliable
Continuously welded housing rigid structure
Avoid air leakage
Safe running and long life

Advantages of direct drive: efficient, maintenance-free
Higher transmission efficiency
No wearing parts, low maintenance
Easier and more effective of maintenance
Sealed self-lubricating bearing for motor, increasing service life
Compact design to save space

Suitable situation: shipbuilding, machinery, chemical industry, warehousing, engineering and other places
Steel welding workshop (welding smoke emissions)
Polishing workshop (dust emissions)
Casting, steel rolling workshop (high temperature dust emission)
local heat dissipation
Enclosed space ventilation. etc

INFI-KOAT Molecular FilmTM, long-lasting coating
Pickling, phosphating and caustic washing to ensure clean surface
Electrostatic incorporation of solid powder to obtain uniform coating
High-adhesion film melt within high temperature furnace
Resistance to ultraviolet, moisture and marine climate


Naming Convention:

Tech Spec

YFMPX Technical Specification

Fan Type

The fan shall be the axial fan with tubular structure. The drive type shall be direct-drive.

Quality Standards
The fan shall be tested in accordance with AMCA Standard 210 and 300. The manufacturer must own the production license for industrial products and ISO9001 quality system authentication.

The fan shall be adopted propeller-type axial wheel. The wheel shall be statically and dynamically balanced to Level G2.5 as per AMCA204 standard. The fan shall keep stable airflow and low noise at maximum speed. The fan shall effectively avoid performance degradation caused by slide of operating point.

Fan Housing
Fan housing shall be constructed of continuously welded cold rolled steel panel, epoxy surface. The flange shall be integrated machine shaping. The panel thickness shall be achieved 2 mm (Model 315-560), 2.5mm (Model 630-710). The flange shall be equipped protective screening to ensure personal safety.

Fan surface shall be polished and cleaned up to remove particulates, welding slag, burrs, sharp edge, iron, oil, then epoxy coating [options: colour changes are available], fan surface shall be free of sags, wrinkle, blisters, exposed metal or peeling after coating. It shall be no corrosion and rust at least 10 years in allowable working condition.

The fan wheel shall be directly connected with the motor. The motor shall adopt B3 installation structure, and its protection grade shall be IP54, while insulation class F and temperature rise B. The motor bearing shall be self-lubricating ball bearing.
Junction box of motor: Since the motor is within the fan, the supplier shall provide junction boxes to lead the wire out of the fan.
Details structure: The flexible universal wheel under the mobile post type fan own brakes, Cylinder and stents part should be set bolt connection device for adjusting export Angle; Fan upper part should handle with portable design for convenient field used.

Permanently fixed aluminum nameplate shall be fixed on fan body clearly display fan mark, product model and serial number (i.e.: unique ID for each fan), so that the customer can use this number to find out the parts used.

Acceptable Manufacturers
Qualified suppliers shall have an AAA credit rating. Providing INFINAIR or similar products, with their design based on YFMPX models of INFINAIR.

Online Message